Results 1 to 2 of 2

Thread: Non-dmx strobes

  1. #1
    New Member
    Join Date
    Apr 2020
    Location
    Pnw
    Posts
    16

    Non-dmx strobes

    I have some non-dmx strobe lights, (adj snapshot II), and the controller that goes with them. They are daisy chained together with 1/4" jack phono cables from the controller.
    Is there a way to run these from my Operator Pro lighting controller? From what I've found I need to run them off a relay pack, but just have on or off, no speed control.
    Any ideas guys?

  2. #2
    Member
    Join Date
    Jan 2014
    Location
    Ottawa Ontario, Canada
    Posts
    1,918
    Yes a DMX relay pack would work but note... you need a real relay pack not an electronic relay pack like all those form ADJ and Chauvet because that version does not play well with this type of fixture. The relay pack will turn the strobes on and off and you can still use the ADJ controller to alter the speed when they are on.
    Last edited by conanski; 06-17-2020 at 05:50 PM.
    Paul O'Brien
    Old Tech Guy
    www.Techott.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
a