I dont like rubber buttons than loose paint with use.
I dont like rubber buttons than loose paint with use.
I would buy one and sell my table and mixer if they could make one with quality faders and cross faders (like rane or allen and heath) and if you could have balanced outs.
2 x Technics 1200 M3D, Allen & Heath Xone:22, Akai LPD8, Audio 10, TSP2, Kontrol S4, Maschine, Macbook Pro MD314LL
http://www.house-mixes.com/profile/DJ%20Synergy | Battle Record:1 Win 1 Loss
The S2 and S4 have balanced outs.Originally Posted by Synergy
Anyone for an internal storage medium? I know that I would find it useful, but I'm not the average user...
Our concept of "self" is merely the transition from the potential energy in our body into the kinetic energy of your actions.
I'd personally like to see some 'midifighter' style arcade buttons on my NS6. Rubber buttons is a 100% turn off for me on a controller, but the cue point buttons on the NS6 are hard to use two fingers on but throwing the arcade buttons on it would be perfect.
xlr out, sorry, I dont really use RCA except for at home...
2 x Technics 1200 M3D, Allen & Heath Xone:22, Akai LPD8, Audio 10, TSP2, Kontrol S4, Maschine, Macbook Pro MD314LL
http://www.house-mixes.com/profile/DJ%20Synergy | Battle Record:1 Win 1 Loss
Being a new S4 owner and coming from CDJ/DJM set up, which i still own and will go back to at some point, there are a few things I would love to see changed.
1. Larger platters
2. Much larger pitch faders - (although you can adjust the range all the way to 2%) Not 100% necessary......
3. Much higher quality input faders. Those bad boys are tight.
4. Gain knobs have click points in the pot, extremely annoying, unless you use autogain and don't touch them at all.
5. XLR outs would be nice but not necessary. 1/4's work great and sound much better than RCA.
6. Spacing between the Pitch faders and Hot Cue/Sampler bank is tight, forces you to use your left hand when adjusting picth on left deck and vice versa, otherwise you will bump something.
7. Hot cue buttons are very close to the pitch faders. More than one occasion i've bumped the pitch fader hitting hot cue#1
I'll think of more later..... Most of my points above are mute though if you are using sync and not touching the pitch.
Traktor SP2 | Audio 10 DJ | DJM 800 Rotary | Kontrol S4 | 1200 M3D's | Shure M44G's | NI Kontrol X1 | KRK RP8's | Yamaha HS80M | Ableton Live 8 | M-Audio FW 410 | Akai MPK 61 | NI Maschine MKI
Make a controller that has a 12" spinning platter, +/- 8% pitch, a s-shaped tonearm, only plays vinyl and it says Technics 1200 on it.
DJM-850 | Technics 1210 M5G x 2 | CDJ-900 x 2 | RCF 312A MKIII x 2 - Soundcloud
1-v-1 Battle Record: 1-0 / 1-v-1-v-1 Battle Record: 0-1
Make a controller that has a 12" spinning platter, +/- 8% pitch, a s-shaped tonearm, only plays vinyl and it says Technics 1200 on it.
i see what u did there.
2 x Technics 1200 M3D, Allen & Heath Xone:22, Akai LPD8, Audio 10, TSP2, Kontrol S4, Maschine, Macbook Pro MD314LL
http://www.house-mixes.com/profile/DJ%20Synergy | Battle Record:1 Win 1 Loss
S2 and S4 have Balanced 1/4" outs...and RCA outs. So no XLR....but 1/4" TRS serve the same purpose
Posting Permissions
Reply With Quote
Bookmarks