Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Turntable Maintenance Introduction

  1. #21
    Junior Member karcevgo's Avatar
    Join Date
    Apr 2013
    Location
    Russia
    Posts
    95
    Hi there. Have a pitch problem on my MK3D. When the fader on the first one is set on -4%, the Software shows it,s only -3,5%. The second MK3D os OK. When -4% is shown as -4%. That happens only in the range of -3% to -5%, then it becomes OK in -8% it's -8%. The dots show the proper values. What is the problem and how to solve it?
    Last edited by karcevgo; 02-23-2016 at 03:16 PM.

  2. #22
    Quote Originally Posted by karcevgo View Post
    Hi there. Have a pitch problem on my MK3D. When the fader on the first one is set on -4%, the Software shows it,s only -3,5%. The second MK3D os OK. When -4% is shown as -4%. That happens only in the range of -3% to -5%, then it becomes OK in -8% it's -8%. The dots show the proper values. What is the problem and how to solve it?
    As the pitch fader wears, the pitch scale goes out of calibration. It is not a problem, your turntable is functioning fine. If it really bothers you, you need to recalibrate the turntable to compensate for the wear.
    www.dnbradio.com

    Quote Originally Posted by Doppelganger
    He's just like me, only he's a man and more stupid

  3. #23
    Junior Member karcevgo's Avatar
    Join Date
    Apr 2013
    Location
    Russia
    Posts
    95
    thanks a lot!

  4. #24
    Junior Member
    Join Date
    May 2018
    Location
    Florida
    Posts
    80
    Great thread! Well appreciated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
a