Results 1 to 5 of 5

Thread: 2 separate controllers and laptops to 2 speakers

  1. #1
    New Member
    Join Date
    Nov 2022
    Location
    Henderson, NV
    Posts
    1

    2 separate controllers and laptops to 2 speakers

    Hello, wondering what the best way to hook up 2 separate controllers/ laptops to the same set of speakers? Both controllers are Pioneer DDJ 1000's.

    Thanks in advance!

  2. #2
    get another mixer in the loop and run each laptop to a separate channel. only way.

  3. #3
    Member
    Join Date
    Jan 2014
    Location
    Ottawa Ontario, Canada
    Posts
    2,020
    An old school 2ch battle mixer would do it or anything really with 2 or more stereo input channels and a set of balanced outputs.
    Paul O'Brien
    Old Tech Guy
    www.Techott.com

  4. #4
    Deez Beats! KLH's Avatar
    Join Date
    Feb 2012
    Location
    In your head
    Posts
    7,806
    There are multiple ways of doing this:

    1. Connect the outputs of each controller to the inputs of a separate mixer and the speakers to the mixer.

    2. Connect the output of the first controller to the input of the second controller. Connect the speakers to the second controller.

    3. Use a splitter to connect the outputs of each controller to the input of a speaker. Connect the "Left" outputs to one splitter and then the splitter plugs into one speaker. Do the same for the "Right" outputs but connect the splitter to the other speaker.

    4. Similar to #1 but using a computer and sound interface instead of a mixer.

    In the end, Option #1 is the most expensive but usually leads to the most flexibility. Option #2 may be cheapest, but the flexibility is dependent on the second controller. I do not recommend #3 or #4 - but they will technically work.
    -KLH
    Visit DJF's Beginner's MEGA thread and drop by my Facebook Fan Page.
    Quote Originally Posted by tannerhornsby View Post
    ... I will remember you guys when I am playing in front of 60 preteens at my cousinís bar mitzvah

  5. #5
    New Member
    Join Date
    Dec 2018
    Location
    Japan
    Posts
    7
    Note that you don't need a proper DJ mixer between the controller and the speakers. A cheaper and simpler small mixing board like the Mackie Mix 8 (what I use) or 5 will do. It is less than $100 and sounds good - plus you can adjust the EQ independently of your controller and it has its own booth out. Just make sure it has the type of outputs you need.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
a