I picked up a Numark DJ2GO Touch back in March and found that it pairs quite nicely with my Pioneer DDJ-SP1 and thought they make a pretty good back-up set-up. So I decided to make a road case for the duo.

And it begins:
con_case1.jpg

I had to make a bracket for the 1/8" headphone jack and used a small piece of aluminum sheet:
con_case2.jpg

I messed up on my measurements for the rear wiring portion. FUUUUUUUUUU..... I still made it work, but it didn't come out as clean as planned.
con_case6.jpg

Getting ready for the foam inserts and paint.
con_case7.jpg

......

Because all the connections for both units are on the side, I had to buy right angle cables for all of the jacks.
con_case10.jpg