Hello all.. I have been scratching my head on this one for a while now and figured i would finally ask for help with connecting my powered subwoofer to my mixer via a compressor.
Here is my setup:

My mixer is a Berhringer Xenyx 802 --> https://www.bhphotovideo.com/lit_files/61870.pdf
My compressor is a Berhringer Multicom xl-pro 4600 4 channel compressor --> https://media.americanmusical.com/It...600_manual.pdf
My sub's input amp is a BASH 300s sub amp --> https://www.parts-express.com/bash-3...w-rms--300-750

I currently use 2 channels on the compressor for left and right main speakers, i use another channel for a microphone and want to use the last channel for subwoofer.

I am trying to get an stereo output from my mixer to go into that ONE channel of my compressor and then from compressor into the bash 300S

I have tried using only one channel of the "control out" on my mixer, via a 1/4" balanced jack to 1/4" input of compressor, then output of compressor into bash 300s via a 1/4" to rca cable, it works but i am missing half the sound as i am only getting one channel, so sub is not as loud.

I want to go through the compressor so help smooth out and protect the sub
If i go out from mixer via rca tape out directly to rca in on sub it works fine but i am bypassing the compressor, which i don't want to do.

Any help is appreciated!

Thanks very much