Results 1 to 4 of 4

Thread: Controller VS Hardware

  1. #1
    New Member
    Join Date
    May 2019
    Location
    Barbados
    Posts
    1

    Controller VS Hardware

    I went and bought a Pioneer DJ ssx 3 like an idiot a year ago. For the most part it works well but sometimes it freezes, lights turn off, stops playing.

    I was thinking for the money you spend this would be a good option. But like most of my forays into dj land. Cheaper always bites you in the ass.

    So advice: sell this piece of junk and get two pioneer cdjs? The 1000's are way too expensive so any thoughts as to the xdj 700? They look pretty good and all i really need is to mix. I would have to buy two of these bad boys and also a mixer.

    Now what happens if i move to australia? Do any of you guys know if taking them to a different voltage country would have any problems? I plan to buy in the states.

    Any help would be appreciated?

  2. #2
    Moderator DJ Bobcat's Avatar
    Join Date
    May 2014
    Location
    Oklahoma City, OK
    Posts
    662

    Controller VS Hardware

    Quote Originally Posted by Bartender67 View Post
    I went and bought a Pioneer DJ ssx 3 like an idiot a year ago. For the most part it works well but sometimes it freezes, lights turn off, stops playing.

    I was thinking for the money you spend this would be a good option. But like most of my forays into dj land. Cheaper always bites you in the ass... Any help would be appreciated?
    The Pioneer DDJ-SX3 is NOT a cheap controller. The problem you describe is a known defect with controllers built at one time, and Pioneer will repair it free of charge...

    https://www.pioneerdj.com/en-us/news...on-and-repair/

    My advice; take it in and get it fixed. If you donít LOVE it after that, then you can think about replacing it with something else.
    Last edited by DJ Bobcat; 05-23-2019 at 10:18 AM.

  3. #3
    Deez Beats! KLH's Avatar
    Join Date
    Feb 2012
    Location
    In your head
    Posts
    7,375
    Quote Originally Posted by DJ Bobcat View Post
    The problem you describe is a known defect with controllers built at one time, and Pioneer will repair it free of charge...
    I strongly agree with this as well.

    I had this experience back when the Numark NS7 was first released. Mine worked for a while, then all of a sudden it just stopped working... and the blinky lights happened. I shipped it back to Numark for warranty service and when it came back it was perfect. I loved it.

    Get the repair. The worst case is that you sell a fully functional controller. The best case is that you fall in love with it again.
    -KLH
    Visit DJF's Beginner's MEGA thread and drop by my Facebook Fan Page.

  4. #4
    As these guys said, the SX3 has a known problem they'll fix for free.. so that's your answer!
    Once it's working reliably you might like it just fine.

    If you don't like it, you can always try switching software.. the SX3 comes with Serato DJ but I think there's no problem mapping it to work with Rekordbox DJ (Pioneer's version of Serato / Traktor).. you can see if you like that better. It does the similar things, but different.. so I'm not gonna say one is better than the other.

    But if you do feel the urge to go with a stand-alone (no computer just decks and mixer) then that move would be a stepping stone for you because when you are using the XJ-700's or XDJ-1000mk2 decks (the 1000mk2 is what I have), you still will use Rekordbox to organize your tracks before you play them on the decks. Once you've used RB to organize an analyze your tracks then you export them to a thumb drive and play them on the decks. Hence the Pioneer controllers w/ Rekordbox and the Pioneer stand-alone decks work together in a system where you can play on any decks with that same thumb drive once you've prepared it with RB, you can even take your thumb drive an plug it into a friends computer that has RB and a controller (even if it's a different model controller than yours.. as long as he's using RB).. and play as if you were on your own setup.

    So that's how the Pioneer system works w/ Rekordbox. But as you notice, RB is central to it all, it's like the Microsoft Windows of DJing, you have to use it whether you like it or not once you get into the Pioneer decks.

    So if that's your goal is to play on Pioneer decks and not just the controllers, think about making that software switch. But there's absolutely NOTHING wrong with using Serato with the SX3, you can DJ just fine with that setup it's also good software and so as others said, step one is get your controller repaired under the recall for free and then see how you feel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
a