Hi All
I have 2 15" active tops and looking at buying a sub or 2 but have a limited budget
Not sure which to buy ?
Would it be better to buy 1 higher spec or 2 lower spec.
they are both 18" active
this one is £250
The SWP18 PRO from Vexus Audio; a powerful 18 inch active subwoofer with an adjustable low-pass filter between 40Hz and 250Hz and a phase switch to let the sub acoustically play along on phase with the main speakers, reproducing excellent deep bass. Featuring a built-in 1200 watt amplifier and IN/THRU connection ports for line-signal-chaining (daisy chaining) to another subwoofer this strong build MDF subwoofer is perfect for mobile DJ's, fixed installations and more.
Features
Large 18" Woofer
Built-in Active Low-Pass Filter
Built-in Amplifier
Deep Resonance-Free Bass
Phase Adjustable (0 - 180 Degrees)
XLR and RCA In/Output
Tophat in Top Panel
Extra Hard Coating
MDF Cabinet with Recessed Handles
Specifications
Peak Power: 800W
Power Max: 400W
Frequency Response: 40Hz - 250Hz
Signal to Noise Ratio: 120dB
Woofer: 18" (46cm)
Top Hat: Yes
Connector: XLR - RCA
Dimensions: 435 x 550 x 615mm
Weight: 27kg
OR
these are
£110
his best selling, awesome sounding, powerful Evolution Audio EL-SUB 18A 18" active PA subwoofer is an ideal addition to you PA setup where serious bass reinforcement is needed. This subwoofer has a built-in power amplifier allowing you to connect via an XLR cable directly from your input source such as a mixer, then also allowing you, if needed, to then connect from this subwoofer, straight out into an active full range cabinet.
There is also an integral 'top hat' fitting mounted into the top of the cabinet, allowing you to install satelite poles (35mm standard poles) to connect to your full range cabs.
We have tested just about all the 18" active subs on the market around this price range and the Evolution Audio EL-SUB 18A is certainly the best in it's class in terms of bass performance and reliability. So if you are after a single or pair of active 18" PA subwoofers to add to your sound system, this model is the one to go for!
Connections: 1 x XLR input, 1 x XLR output
Phase Reversal: 0 / 180 °
Adjustable Crossover: 40 to 150Hz
Variable input level
Metal and metal protective guards
Impedance: 8 ohms
Frequency response: 40Hz to 300 Hz
Signal to noise ratio> 80dB
Power supply: 220 - 240V, 50Hz
55 x 65 x 45cm
Weight: approx 31kg
Bookmarks