Hi
Does anyone have any advice/tips on how to mix drum and bass with house/techno, finding it pretty hard.
any help appreciated!
Hi
Does anyone have any advice/tips on how to mix drum and bass with house/techno, finding it pretty hard.
any help appreciated!
Impossible to seamlessly blend by BPM beat matching the genres of house/techno to Drum&Bass.
125bpm to 175bpm doesn't go!
Also a 4/4 beat at 175bpm becomes gabba, which is well...gabba.
Some tracks exist that dramatically switch from BPM mid-track and these can be kept aside as secret weapons to aid a quick transition to differing BPMs like 5mins into this track:
Thankfully with technology these days a few bits of trickery could be used to pull off a good sounding transition.
Off the top of my head I would wait till a breakdown without beats, then loop a few bars. Gradually speed it up till fast enough then drop the D&B breaks into it.
If you are asking this question it means you probably don't know about DJing and the genres. Better to master each seperately and only much later on plan on blending them. Otherwise don't mix them, just segue from one genre to the other.
On that note, if you're Moby then you don't care about BPM, just turn it up to .....1000
Last edited by pete; 02-25-2019 at 12:01 PM.
bored, curious, deaf or just bad taste in music?
finally a mix by me
and what's this, another shoddy mix...another dull mix
I would have said he same thing as Pete. Seem he's a good moderator, listen to him !
Only way I can think of is to have some sort of ambient filler between each track. You won't be able to match beats but if you somehow found dozens of tracks that were just various sounds (no beats) and they fit the mood of your set, maybe that could work. Of course the problem is that you'll keep having stretches of your mix with no beat. Another option would be to play your house tracks then have some sort of transition that segues into your D&B set, so you're not constantly mixing back and forth.
Bookmarks