Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Any affordable options to eliminate the XLR cables to my active loudspeakers?

  1. #11
    New Member
    Join Date
    Jan 2019
    Location
    OverHere
    Posts
    7
    Quote Originally Posted by chris661 View Post
    The biggest problem with bluetooth is going to be latency.
    Quality isn't bad these days, with Bluetooth 4.1 having a decent amount of bandwidth for shoving data around, but 50ms+ of latency is going to mess things up for you, even if the average bluetooth user doesn't mind.

    VHF wireless systems, like the ones used for guitars, mics, and in-ear monitors, are where I'd start looking. Not gonna be cheap, though.

    Chris
    +1......

  2. #12
    Moderator DJ Bobcat's Avatar
    Join Date
    May 2014
    Location
    Oklahoma City, OK
    Posts
    652

    Any affordable options to eliminate the XLR cables to my active loudspeakers?

    There is another option. You can convert XLR to CAT5/6 using a device like this...



    Studio Hub ADAPT-XLRF XLR Female to RJ-45 ADAPT-XLRF

    Youíd need a pair... one on each end, but it uses a single CAT5 cable through the wall to the wall plate. Iíve used this product to connect my controller (inside a case) to a RJ45 jack on the back of my rack, and then to the mixer in the rack. It works beautifully and it was an easy one click RJ45 connection . I donít remember paying $50 a piece, but it looks like thatís what theyíre selling for.

    I donít use mine anymore since I donít use a separate controller/case. My controllers are now mounted in my rack, so I can use short XLR cables for my connections inside the rack.
    Last edited by DJ Bobcat; 03-11-2019 at 10:40 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
a