Originally Posted by
efinque
Well, anyway, I dealt with the pgm cue summing the master/booth outs with the same 10k+10k, the problem is it comes via the output preamp so it could be louder than channel cue, probably needs an additional resistor in it (ie. matched by ear).. also burnt my hand with soldering iron.
EDIT : the output preamp has trimmers for setting gain though.. I think I'll just put another 10k in the master PFL and call it a day. There's still some labeling etc and other miscellaneous housework to do.
EDIT 2 : the 10k+10k to another 10k isn't necessarily enough esp. with the equalizer on but I can't be bothered with it as I have no test equipment at the moment (the catch here is not to connect anything of high value into it while testing to avoid possible material losses, the bare minimum is to probe the inputs/outputs with a DMM to see if there's an abnormally high voltage present)
Bookmarks