Results 1 to 2 of 2

Thread: DIY Flood / upwash lights

  1. #1
    Junior Member
    Join Date
    Feb 2012
    Location
    Northern Illinois
    Posts
    61

    DIY Flood / upwash lights

    I have really been needing to add some sort of wash or ambient lighting that i could control, during the dances I DJ.
    I built up some ply wood boxes and mounted some angle braces inside in an attempt to create a sudo lens, to help beam the light a bit more.
    I'm very happy with the results!
    I use a total of eight, 1 meter LED strips, 2 white, 2 blue, 2 green, and 2 red.
    This is the module that i am using to control them as well.
    http://www.nledshop.com/fourchan/


    With freestyler DMX running on an old laptop and with a MIDI controller I am able to change the color and brightness on the fly and even assigned a button to strobe the white lights.
    Right now i have just built two of them, and i have enough parts for five. I figure one shinning on the dance floor and two on either side of the room should have a nice effect.

    PS the christmas lights were not my idea But you can see two of my eight ADJ pocket scan lights. (all are on the same DMX chain)
    Last edited by bigCcat; 10-22-2017 at 10:53 PM.

  2. #2
    Junior Member
    Join Date
    Feb 2012
    Location
    Northern Illinois
    Posts
    61
    Well, Photobucket is out the window apparently...
    I have attached a few pictures, so you get the idea of how bright the light is.
    Attached Images Attached Images
    • File Type: jpg 1.jpg (22.1 KB, 5 views)
    • File Type: jpg 2.jpg (20.1 KB, 7 views)
    • File Type: jpg 5.jpg (16.8 KB, 5 views)
    Last edited by bigCcat; 10-22-2017 at 11:57 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
a