Post Your System

[DJ Rock Diesel]

I have jbl prx715 tops and they don't have a low pass filter. does the srx828sp have the ability to send only 80-100hz and above to the tops?

I have the same speakers. You just put them into "monitor" mode to activate the filter. They will only produce highs and mids and go load as hell

[truitt]

ok i'll try it. I just know from experience if you have tops and subs producing the same low frequencies it doesn't sound right

[DJ Rock Diesel]

ok i'll try it. I just know from experience if you have tops and subs producing the same low frequencies it doesn't sound right

From the JBL website:

Frequency Range (-10 dB) Main: 42.9 Hz - 19.5 kHz
Monitor: 43.6 Hz - 19.3 kHz
Frequency Response (±3 dB) Main: 58.1 Hz - 17.2 kHz
Monitor: 60.7 Hz - 16.7 kHz

[truitt]

If the srx828sp can't low pass the tops i'll just buy a two way crossover

[disbjohn]

If the srx828sp can't low pass the tops i'll just buy a two way crossover

You can high pass the tops. It has multiple settings in the dsp.

[disbjohn]

I think the jbl srx 800 series is best bang for buck. You can get 2 dual 828s, and 2 835 three ways for under 5k.

[truitt]

I already have jbl prx715 tops and its not worth getting srx tops. im just in the market for subs

[DJ Rock Diesel]

I already have jbl prx715 tops and its not worth getting srx tops. im just in the market for subs

That's what I'm running and I couldn't be happier

[truitt]

That's what I'm running and I couldn't be happier

how do you low pass your tops??

[disbjohn]

how do you low pass your tops??

You want to high pass the tops. There's a setting on sub and you can select the frequency to high pass.