04-28-2012, 03:54 AM
04-28-2012, 09:55 AM
You can include the pitch decals in your shipment as I don't have them in stock now. But I have all the LEDs needed for the conversion and mods. I'll PM you my mailing address.
Originally Posted by Ver Jaina
04-29-2012, 02:58 AM
if that's the case then i would order the pitch decals & will let you know by end of May
Originally Posted by Nicadraus
replied your PM too
08-11-2012, 10:12 AM
Updating this thread.
Same post in this thread.
My recent work...
These Limited Gold edition 1200s (110v) belong to a popular club here in Manila, Republiq. Before that, they were used first in Temple Bar, Greenbelt (from 2002), Embassy Superclub (2004-2010), and Republiq (2010-2012). Unfortunately, the condition was so severe and so many parts had to be replaced. The power supplies were also busted as well as the drive ICs because they were plugged into a 220v outlet.
As I finished cleaning the platter and repainted the dots, I started to reface them. Unfortunately, this is what happened:
The gold/chrome platting has peeled off. I had worked on a pair of Limited Gold edition before with almost the same condition but never experienced anything like this. On close up pictures, you will see that the aluminum diecast metal had also been affected by the corrosion. Powdery white substance can also be seen as a result of the reaction. Some parts of the platter's upper & lower lips and dots were eaten by the corrosion.
The platting on the start/stop and 33/45 button have also been chipped. So I replaced both platters and start/stop, 33/45 assemblies with non-platted parts.
Some of the gold platting on the pop-up lamp canister and strobe canister, have also tarnished and faded so there was nothing more I could do to save them unless have them chromed and electro-platted again which will cost a lot.
-Scraped and sanded the body and repainted to black. Wrapped with carbon fiber vinyl sticker (for automobiles)
-Repainted rubber base cabinet
-Cleaned & rebuilt the tonearm assembly and calibrated
-Replaced RCA cables and connectors
-Eliminated ground wires
-Replaced all LEDs to super bright white (strobe, 33/45. pop-up lamp, pitch indicator)
-Repainted and refaced the 1200 Limited plate badge
-Rewound power supplies and drive ICs replaced
Here is the finished project:
08-11-2012, 10:13 AM
08-11-2012, 11:03 AM
Awesome work as usual.
Might have to send you mines to get them back up and running.
08-11-2012, 11:09 AM
Thanks Rek! Sure man, anytime.
Originally Posted by Rek_Aviles
08-11-2012, 03:18 PM
wow, those platters looked really bad. great work Nic!
08-11-2012, 03:28 PM
nice work. is that CF a wrap?
08-11-2012, 08:44 PM
Originally Posted by JamesRoss
Thanks Marc! Yup, it's CF wrap.
Originally Posted by Marc S