• Behringer DDM4000 Review (After 2 Year of Use)

    Behringer DDM4000 Review Ė After 2 Years of Almost Daily Use

    Looks and Display
    At first glance it looks complicated yet it makes you think about the many things that the mixer is capable of doing. The blinding lights that were greatly hated on the early models have been removed so the mixer is easier to look at in lowlight situations. The channel and master LED level bars are fairly accurate and quick to respond to volume changes. Keep in mind there are only 2 colors on the bar, orange and red, this means that there is no neutral green or third color making it hard for one to maintain a 0dB signal. This is not that big of a deal, just donít let your level meter go into the red. All of the buttons are plastic and after having the mixer for two years the oils and skin cells from my finger I guess have been absorbed by the buttons I hit most, such as the PFL button, leaving a smudge on the button causing the LED to look a bit dimmer, and simple cleaning solution will fix that problem. Also the LED on a PFL button has gone very dim which is interesting because I have rarely touched that particularly PFL button. The mixer is overall in a logical layout except for the headphone jack which is place nearly in the middle of the right hand side of the mixer, though you get used to it after a while.

    For a mixer that packs many features it sure is light, maybe a little too light causing one to be skeptical of its build quality. I have dropped it a few times, about one foot falls, and it has survived. As I stated before all of the buttons are hard plastic, this creates a problem. The plastic buttons grind against the metal faceplate and create dust that you can see forming on the side of the mixer. The buttons I have hit the most, PFL buttons, have lost some sensitivity requiring a forceful push to activate or deactivate the button. The channel faders are light but they do not feel smooth. It feels as if there is some sand in the fader track. The crossfader is smoother and is capable of performing your basic scratches. The eq knobs are a little stiff but will smooth out with use.

    Sound Quality
    The sound is a bit cold and bland in my opinion which causes me to sometimes leave a light reverb effect on throughout my set.

    The DDM comes with a decent amount of effects such as flanger, echo, bitcrusher and several others which you can use on any or all channels as well as the mic. You can control the specific parameters of each effect to achieve the desired sound which makes the effects sound good after proper adjustment. You can also specify if you want the effects to only affect the hi, mid, or low of the music. The mixer automatically matches effects with time parameters with its built-in BPM counter but this can easily be overridden. Controlling the effects can be slightly difficult being that the controls are small and have multi-purposes. If youíre selecting a channel to set your effects to and decided to hit the ďeffects onĒ button it will not engage which still throws me off even after two years of use.

    The sampler section has two banks that lets one record up to 32 seconds on each bank. I donít use it much being that I have a dedicated sampler, but from the little I have experimented with it itís possible to create some cool effects and delays. There is a noticeable fuzz sound in the recordings.

    The mic input truly sucks. There is no volume control only a trim control. This means one cannot regulate the amount of db coming into the channel causing one to easily get crazy amounts of feedback even if you have the trim knob below 25 percent. Because of this a have to use a 2 channel studio mixer which takes up one of my mixer channels so I can use a microphone.

    Inputs and Outputs
    This mixer has almost all the inputs and outputs anyone would need except it is missing an usb output.

    -mic input to much gain
    -on some occasions the effects stop working properly and change the sound quality when you engage it (think of a filter). This can be fixed by repowering the unit.

    The DDM has many features so I canít go over everything. It is great if you want a mixer that does it all for a low price. One should expect that the mixer will not work as well as the more expensive mixers itís trying to simulate. I am happy that I bought the mixer because it gave me the opportunity to experiment with many features that more expensive models have. If you are going to use a microphone avoid this mixer at all costs. The mixer is decent but needs to be at more streamlined in terms of its effects controls.

    If you have any questions feel free to ask.
    This article was originally published in forum thread: Behringer DDM4000 Review (After 2 Year of Use) started by DJ Riddims View original post
  • Recent Threads


    Old School Vinyl DJs - First Record You Bought

    Thread Starter: BDC

    I was 13 when I bought my first record. Took the subway from Scarborough to downtown Toronto and went to Sam The Record Man on Yonge St.
    It was

    Last Post By: Manu Today, 01:12 AM Go to last post

    First Mix - Need Harsh Criticism

    Thread Starter: aslaterm32

    I've just finished my first mix and I'm trying to improve so I would love any criticism no matter how harsh. [LINK REMOVED] The genre is techno and the

    Last Post By: KLH Yesterday, 04:10 PM Go to last post
    Luap Skywalker

    What fabric material used (Technics RGS0005Z)

    Thread Starter: Luap Skywalker

    Any idea what material did Technics originally used for this one pls? (in terms of Technics' "Quality Control" standards, if I must

    Last Post By: Luap Skywalker 04-22-2019, 10:52 AM Go to last post
  • DJF Recent General Threads


    Old School Vinyl DJs - First Record You Bought

    Thread Starter: BDC

    I was 13 when I bought my first record. Took the subway from Scarborough to downtown Toronto and went to Sam The Record Man on Yonge St.
    It was

    Last Post By: Manu Today, 01:12 AM Go to last post

    PR services?

    Thread Starter: AnthonyM


    I'm thinking about getting PR services from a company to promote my latest release and tbh I'm a bit lost in terms of promotion.

    Last Post By: Manu 04-23-2019, 10:14 AM Go to last post

    24 Hours until my first gig- Anxiety and nerves

    Thread Starter: Jambon

    My nerves and anxiety are through the roof, semi lost the plot. It's really effected my mixing today. Had a proper melt and couldn't think straight. Dread

    Last Post By: Manu 04-21-2019, 02:03 PM Go to last post

    Feeding Xone K2 as a 3rd Deck

    Thread Starter: jcen425

    [Solved] Delete this thread [Solved]

    Last Post By: jcen425 04-19-2019, 02:54 PM Go to last post


    Thread Starter: Manu

    I'll get the door

    Last Post By: Manu 04-19-2019, 02:38 AM Go to last post
    DJ Matt

    can you recommend a VJ pool ?

    Thread Starter: DJ Matt

    i need a place where i can source music videos without a monthly subscription, just pay for each video invididually or buy credits and use them up

    Last Post By: DJ Matt 04-18-2019, 05:56 AM Go to last post