• Behringer DDM4000 Review (After 2 Year of Use)

    Behringer DDM4000 Review – After 2 Years of Almost Daily Use
    http://www.purehousemusic.net/kitpic...htPers_web.jpg

    Looks and Display
    At first glance it looks complicated yet it makes you think about the many things that the mixer is capable of doing. The blinding lights that were greatly hated on the early models have been removed so the mixer is easier to look at in lowlight situations. The channel and master LED level bars are fairly accurate and quick to respond to volume changes. Keep in mind there are only 2 colors on the bar, orange and red, this means that there is no neutral green or third color making it hard for one to maintain a 0dB signal. This is not that big of a deal, just don’t let your level meter go into the red. All of the buttons are plastic and after having the mixer for two years the oils and skin cells from my finger I guess have been absorbed by the buttons I hit most, such as the PFL button, leaving a smudge on the button causing the LED to look a bit dimmer, and simple cleaning solution will fix that problem. Also the LED on a PFL button has gone very dim which is interesting because I have rarely touched that particularly PFL button. The mixer is overall in a logical layout except for the headphone jack which is place nearly in the middle of the right hand side of the mixer, though you get used to it after a while.

    Feel
    For a mixer that packs many features it sure is light, maybe a little too light causing one to be skeptical of its build quality. I have dropped it a few times, about one foot falls, and it has survived. As I stated before all of the buttons are hard plastic, this creates a problem. The plastic buttons grind against the metal faceplate and create dust that you can see forming on the side of the mixer. The buttons I have hit the most, PFL buttons, have lost some sensitivity requiring a forceful push to activate or deactivate the button. The channel faders are light but they do not feel smooth. It feels as if there is some sand in the fader track. The crossfader is smoother and is capable of performing your basic scratches. The eq knobs are a little stiff but will smooth out with use.

    Sound Quality
    The sound is a bit cold and bland in my opinion which causes me to sometimes leave a light reverb effect on throughout my set.

    Effects
    The DDM comes with a decent amount of effects such as flanger, echo, bitcrusher and several others which you can use on any or all channels as well as the mic. You can control the specific parameters of each effect to achieve the desired sound which makes the effects sound good after proper adjustment. You can also specify if you want the effects to only affect the hi, mid, or low of the music. The mixer automatically matches effects with time parameters with its built-in BPM counter but this can easily be overridden. Controlling the effects can be slightly difficult being that the controls are small and have multi-purposes. If you’re selecting a channel to set your effects to and decided to hit the “effects on” button it will not engage which still throws me off even after two years of use.

    Sampler
    The sampler section has two banks that lets one record up to 32 seconds on each bank. I don’t use it much being that I have a dedicated sampler, but from the little I have experimented with it it’s possible to create some cool effects and delays. There is a noticeable fuzz sound in the recordings.

    Mic
    The mic input truly sucks. There is no volume control only a trim control. This means one cannot regulate the amount of db coming into the channel causing one to easily get crazy amounts of feedback even if you have the trim knob below 25 percent. Because of this a have to use a 2 channel studio mixer which takes up one of my mixer channels so I can use a microphone.

    Inputs and Outputs
    This mixer has almost all the inputs and outputs anyone would need except it is missing an usb output.

    Problems
    -mic input to much gain
    -on some occasions the effects stop working properly and change the sound quality when you engage it (think of a filter). This can be fixed by repowering the unit.

    Overall
    The DDM has many features so I can’t go over everything. It is great if you want a mixer that does it all for a low price. One should expect that the mixer will not work as well as the more expensive mixers it’s trying to simulate. I am happy that I bought the mixer because it gave me the opportunity to experiment with many features that more expensive models have. If you are going to use a microphone avoid this mixer at all costs. The mixer is decent but needs to be at more streamlined in terms of its effects controls.

    If you have any questions feel free to ask.
    This article was originally published in forum thread: Behringer DDM4000 Review (After 2 Year of Use) started by DJ Riddims View original post
  • Recent Threads

    Unknown DJ

    Avicii is Dead at 28

    Thread Starter: Unknown DJ

    https://www.billboard.com/articles/n...d-tim-bergling

    Last Post By: Mark_Spit Today, 05:55 PM Go to last post
    mitchiemasha

    Anyone using VDJ & Controller? Hidden PIONEER FX and MORE! TWEAKS!!!

    Thread Starter: mitchiemasha

    Here's a document of my controller mapping TWEAKS. Set up on the DENON MC7000 but will easily work well on others.

    Waveform Display Zoom

    Last Post By: mitchiemasha 04-18-2018, 03:10 PM Go to last post
    KAL

    Anyone interested in this monster Trance mix I made.....?

    Thread Starter: KAL

    https://soundcloud.com/dj-kal/kal-tr...l3-the-big-mix

    https://www.mixcloud.com/KAL_/kal-tr...3-the-big-mix/

    Last Post By: KAL 04-18-2018, 11:31 AM Go to last post
  • DJF Recent General Threads

    Unknown DJ

    Avicii is Dead at 28

    Thread Starter: Unknown DJ

    https://www.billboard.com/articles/n...d-tim-bergling

    Last Post By: Mark_Spit Today, 05:55 PM Go to last post
    djrebelv

    - What's the best way to get exposure on club level gear? -

    Thread Starter: djrebelv

    Hey guys, wondering if you could help me out here.

    I've been playing with my DDJ-SX for years and know the ins-n-outs and I love it but..

    Last Post By: Rek_Aviles Today, 05:21 PM Go to last post
    divisor

    Gain problems . ? helpmeeplzz(sinking)

    Thread Starter: divisor

    Hey guys!
    Few moths ago i bought new speakers, headphones, than i took a break. Used the speakers simply to listen. Now i decided to record a mix

    Last Post By: Hygro Yesterday, 06:46 PM Go to last post
a