PDA

View Full Version : Puck placement question



electricsmooth
04-30-2012, 02:18 PM
I recently bought 6 more Blizzard pucks and had a question about placement. I previously had about 8 of them and kept them behind my setup, away from people. I was thinking now to put them up against the walls along side of the venue but I just realized that they aren't very safe just lying around by the wall. They could easily be stepped on. They also would not look very professionaly if there is nowhere to hide them.

What do yuo guys do for such setups? I was thinking of maybe constructing some form of 3 sided enclosure.

Synaxis
04-30-2012, 03:59 PM
Is this similar to what you are looking for?


http://www.youtube.com/watch?v=THKQclxhE0U

Pro Tip: If you end up constructing them yourself, which would probably be the cheapest route, don't make them perfectly square. Instead, make the sides on an angle, so that you can stack the covers on one another.

Example:


\....../
\\__//
.\__/

electricsmooth
04-30-2012, 04:39 PM
Something like that is what I'm looking for but I can tell that those ones are gonna be expensive so I'll go to Home Depot and see what ideas I come up with. Thanks for the tip (I was going to make squares).

DJ M&M
04-30-2012, 06:22 PM
The easiest way is some 1/4 inch plywood, and cut and fit the 3 pieces then use a finishing nail gun to assemble. Then spray paint the matte black or wrap them in black felt

SummitAudioDJ
05-03-2012, 09:03 AM
Check thes out $25 each when you buy a 4 pack. They also come in white.

http://www.pssl.com/PSSL-Light-Shield-4-Pack-For-LED-Fixtures-Black

http://www.pssl.com/images/trans.gif

Dave Daschofsky
05-05-2012, 04:30 AM
You could get large diameter PVC pipe in black and cut it in half lengthwise.