*NOT* Off Topic SPAM !

[baltoed]

Hello People

first post..

Im a new electronics vendor looking to see what, if any, interest I can get from these forums in the products I can provide. I am here as a "test" persec Just J's suggestions..I have noticed you have a vendor section with no vendors..just the same .. I admit little to no knowledge in the *guts* part of the products I can provide..but I do know how to give good pricing to develop relationships.. I will try to provide dealer pricing whenever possible ( read almost always ) in hopes to put food on the table for me and my family. In the very near future I will put some sample pricing up for some items that I can provide similar to what I see posted in the wanted forum..here in this thread. I will for the most part answer questions about pricing publicly in this thread as well as to share that info to the general membership..Hope to see this become good for you and I..be back real soon.

Any one know if its ok for me to post some websites of the product lines I carry here in this forum?

Balto~ED

[baltoed]

Technical Pro by Technical HiFi
DJ-16a - Silver
Digital Stereo Preamp Mixer w\ effects


4 Stereo Channels
2 Phono / 8 Line / 2 Mic inputs
Dual 10 Band graphic equalizer w\ 10 Band Blue LED Meter
6 Sound Effects with speed and volume control
Tone and Level controls for microphones w\ talkover switch
w\ cue switch and individual kill switch
Push Button Cueing w\ Cue Pgm slide control
Individual Gain Control per channel
Separate Master, Booth, and record outputs
Headphone Jack w\ Individual volume control
Assignable SMOOTH GLIDE removable cross-fader
Dimensions: 19"W x 4.13"H x 9.45"D
(482mm x 105mm x 240mm)
Weight: 9 lbs (4 kg)
110-220V Switchable

M.A.P $189.00

Price : Inquire

[baltoed]

Technical Pro by Technical HiFi
DJ-18 - Silver
Digital Stereo Preamp Mixer w\ echo

4 Stereo Channels
2 Phono / 8 Line / 2 Mic inputs
Dual 10 Band graphic equalizer w\ 10 Band Blue LED Meter
20mS~250mS Digital Echo w\ Delay, Repeat & Level
Tone and Level controls for microphones w\ talkover switch
w\ cue switch and individual kill switch
Push Button Cueing w\ Cue Pgm slide control
Individual Gain Control per channel
Separate Master, Booth, and record outputs
Headphone Jack w\ Individual volume control
Assignable SMOOTH GLIDE removable cross-fader
Dimensions: 19"W x 4.13"H x 9.45"D
(482mm x 105mm x 240mm)
Weight: 9 lbs (4 kg)
110-220V Switchable

M.A.P $209.00
Price: Inquire

[baltoed]

Technical Pro by Technical HiFi
DJ-18a - Silver
Digital Preamp Mixer w\ effects & echo

4 Stereo Channels
2 Phono / 8 Line / 2 Mic inputs
Dual 10 Band graphic equalizer w\ 10 Band Blue LED Meter
6 Sound Effects with speed and volume control
20mS~250mS Digital Echo w\ Delay, Repeat & Level
Tone and Level controls for microphones w\ talkover switch
w\ cue switch and individual kill switch
Push Button Cueing w\ Cue Pgm slide control
Individual Gain Control per channel
Separate Master, Booth, and record outputs
Headphone Jack w\ Individual volume control
Assignable SMOOTH GLIDE removable cross-fader
Dimensions: 19"W x 4.13"H x 9.45"D
(482mm x 105mm x 240mm)
Weight: 9 lbs (4 kg)
110-220V Switchable

M.A.P. $ 229.00
Price: Inquire

[baltoed]

10" Two Way Loudspeaker

D-Box10 Specs

10" Trapezoidal Speaker
2" Voice Coil \Kapton
30 oz Magnet
6x7 Horn
Input: 1\4 Plugs, Speakon
Freq resp 45hz-20khz \ Sens 97+/-2db (1W@1M)
Power 160w pk @8 ohm
Dimensions: 13.5" x 15" x 21"
(340 x 375 x 530mm)
Weight: 33 lbs (15 kg)

M.A.P. $89.00
Price Inquire

[baltoed]

12" Two Way Loudspeaker
D-Box12 Specs

12" Trapezoidal Speaker
2" Voice Coil \Kapton
40 oz Magnet
Compression Driver - 1.5" Voice Coil 25oz magnet
6 1/4 x 16 1/2" Horn
Input: 1\4 Plugs, Speakon
Freq resp 50hz-20khz \ Sens 96+/-2db (1W@1M)
Power 240w pk @8 ohm
Dimensions: 17.5" x 16.5" x 26"
(435 x 410 x 660mm)
Weight: 44 lbs (20 kg)

M.A.P $119.00
Price: Inquire

[baltoed]

15" Two Way Loudspeaker
D-Box15 Specs

15" Trapezoidal Speaker
2.5" Voice Coil \Kapton
50 oz magnent
Compresion Driver - 1.5" Voice Coil 25oz magnet
10 x 18 1/2" horn
Input: 1\4 Plugs, Speakon
Freq resp 50-20khz \ Sens 96+/-2dc (1W@1M)
Power 350w pk @8 ohm
Dimensions: 21.5" x 18" x 34"
(550 x 460 x 860mm)
Weight: 55 lbs (25 kg)

M.A.P. $149.00
Price: Inquire

( image as D-Box10 )

[Mello]

do you have an email address?

[Stripe]

I am going to copy this to the vendor area of the forum as well.

[baltoed]

do you have an email address?


Duhh..thats right..keep me on my toes.. :smash:

Please use quote@sales2please.com and include a zipcode when asking for pricing as well. Sorry to be so slow getting this " off the ground" but I sorta have a full plate. Sure is great I have 14 hours in this 8 hour work day to get it all done !

Balto~ED

[baltoed]

The LX/LZ Series of power amplifiers from Technical Hi-Fi represents a new era in quality power amplification. The line consists of three models housed in a rugged 2-U chassis, incorporating innovative features and unmatched performance. Three 2 channel models offer power points from 1000 to 2000 watts per channel, giving your music bigger bass, cleaner highs, and providing a vast dynamic range that can handle the most demanding digital soundtracks without running out of headroom. LX/LZ Series amplifiers are professional tools designed and built to meet the most demanding audio requirements.
L SERIES Professional Power Amplifiers

item # LX1000 - Blue/Silver
item # LZ1000 - Black

1000 Watts peak power
450 Watts @ 2 ohm
360 Watts @ 4 ohm
200 Watts @ 8 ohm
Inputs: XLR, 1/4", RCA plugs
Outputs: Speakon, Banana plug gold terminals
Dual Cooling fan
Iridescent blue LED meter
Clipping lights
Ground Switch
Dimensions: 19"W x 4"H x 9"D
(490 x 100 x 230mm)
Weight: 18 lbs (8.2 kg)
110-220V Switchable
M.A.P. $149.00 Price: Inquire
==========
item # LX1500 - Blue/Silver
item # LZ1500 - Black

1500 Watts peak power
500 Watts @ 2 ohm
400 Watts @ 4 ohm
220 Watts @ 8 ohm
Inputs: XLR, 1/4", RCA plugs
Outputs: Speakon, Banana plug gold terminals
Dual Cooling fan
Iridescent blue LED meter
Clipping lights
Ground Switch
Dimensions: 19"W x 4"H x 9"D
(490 x 100 x 230mm)
Weight: 19 lbs (8.7 kg)
110-220V Switchable
M.A.P. $179.00 Price: Inquire
==========
item # LX2000 - Blue/Silver
item # LZ2000 - Black

2000 Watts peak power
600 Watts @ 2 ohm
460 Watts @ 4 ohm
240 Watts @ 8 ohm
Inputs: XLR, 1/4", RCA plugs
Outputs: Speakon, Banana plug gold terminals
Dual Cooling fan
Iridescent blue LED meter
Clipping lights
Ground Switch
Parallel \ Stereo Switch
Dimensions: 19"W x 4"H x 9"D
(490 x 100 x 230mm)
Weight: 20 lbs (9.2 kg)
110-220V Switchable
M.A.P. $ 219.00 Price: Inquire

[baltoed]

Technical Pro Double CD Player w/Mixer

item # DBL-B5 - Black
item # DBL-S5 - Silver
Double CD w\ Pitch Control

24 bit linear 8 Times Over Sampling
Jogwheel Search \ Shuttle Wheel (Forward & Reverse)
7 different speed scans \ Frame Search (1/75sec-step)
Auto Cue with instant restart & Anti Skip
44.1khz sampling frequency
20 tracks program Play
Variable pitch control ±16%, Precision A-B loop
Digital Outputs
Rackmountable
Dimensions:19"Wx3 1/2"Hx2 5/8"D
(482mm x 90mm x 65mm)
Weight: 8 lbs (3.6 kg)
110-220V Switchable

M.A.P $279.00 Price: Inquire

[jdiddy]

No offense but those prducts look like the cheap stuff you would find on Ebay. I think I'll stick to the good stuff..JBL, DBX, Crown, etc..

[baltoed]

No offense but those prducts look like the cheap stuff you would find on Ebay. I think I'll stick to the good stuff..JBL, DBX, Crown, etc..

No offense taken..your entitled to an opinion..on whatever your using as a measure?? But then one man's trash is another mans treasure ! ( Hey someone married my ex-wife too..and supposedly is happy ). Just the same..here *is* what I have to offer..and more to come.

hmm cheap ..does that mean inexpensive and a good value? Great..thanks for the compliment !

Balto~ED

[baltoed]

Item # WM-1000
Professional VHF Wireless Microphone

Dual Signal VHF High band
Dual Microphone (included)
Carrier Frequency Range: 220-260 mhz
Frequency Stability: =/-0.005% w\ Quartz Controlled
Modulation Mode: FM
Max. Deviation Range: =/-25khz, w\ Limiting Compressor
Frequency Response: 40hz-20khz
S/N Ratio: >90db
THD : <0.5%
Audio Dynamic Range: >90db
Service Areas: > 50m.
Temperature Range: -10 to 55 C˚
110-220V Switchable

M.A.P. $ 119.00 Price: Inquire

[DJ KAPUT]

No offense taken..your entitled to an opinion..on whatever your using as a measure?? But then one man's trash is another mans treasure ! ( Hey someone married my ex-wife too..and supposedly is happy ). Just the same..here *is* what I have to offer..and more to come.

hmm cheap ..does that mean inexpensive and a good value? Great..thanks for the compliment !

Balto~ED

I think he meant

cheap = complete shit

but that was just my interpretation

[baltoed]

Every feature on the BLUE ICE amplifiers has been carefully designed and situated for maximum performance. Each oversized Volume Control Knob has its own Xenux LED indicator; the Left and Right Channel Meters are multi colored to ease visibility, with built in software to automatically range from low to full power. The full size Digital Sensitivity Meter is a highly demanded feature lacking in many upper scale amplifiers today.

item X-5000B (Black Sapphire)
item X-5000S (Silver Artic)
item X-5000F (Blue Frost)
item X-5000R (Red Flames)

900 Watts @ 2 ohm
600 Watts @ 4 ohm
350 Watts @ 8 ohm
Inputs: 1/4" plugs
Balanced XLR
RCA plugs
Outputs: Banana plug gold terminals
Balanced XLR
1\4" plugs
BLUE ICE Aluminum Panel cut out illuminates
2 Industrial Strength Aluminum Handles
1 Blue Numerical Digital sensitivity Input meter
2 Iridescent Blue LED Power Output Light Meter
2 Power Output Digital VU multi colored LED meter
Integrated Software to Range Output Meters at full power
or at 10% power
2 LED light indicator on each knob
Chameleon Power Button changes from Red to Blue to
indicate when Amplifier is ready
Dual Turbo Cooling fan
Additonal Colors all have Silver Detailing
Dimensions: 19"W x 7.5"H x 14.5"D
(490 x 190 x 370mm)
Weight: 43 lbs (19.6 kg)
110-220V Switchable

M.A.P $ 449.00 Price: Inquire

[baltoed]

Item # BOM-21X

The BOM21X is the first sub-woofer in the new D-BOX Series, designed specifically for club and high-end pro audio users. At the heart of this system is a massive 21-inchdriver makes it ideal for use in the most demanding environments where pure bass power is the goal. An incredible 1,600 Watt program rating produces amazing new levels of bone-jarring bass, making the BOM21X a superior choice for anyone looking for thunderous lows in large venue environments.

Bom-21X Specs

Max Power 1600w @8 ohm
21" aluminum frame
4" Voice Coil
120 oz mag
30-300khz
102+/-2db
1/4" locking jack & Speakon inputs
Dual Pole Mount \ Stackable
4 Integral Carry Handles
Dimensions: 32" x 24" x 24"
(815 x 610 x 610mm)
Weight: 77 lbs (35 kg)

M.A.P. $399.00 Price: Inquire

[baltoed]

ITEM # GMI-19 R (Turntable)

SPECIFICATIONS
ROAD CASES FOR 19" MIXER
TO ACCOMMODATE TWO TURNTABLES
PREMIUM 1/2" MULTI-LAYER PLYWOOD (LIGHT WEIGHT)
CHROME CORNERS, REMOVABLE LID, CARRYING HANDLES
FULLY FOAM LINED TURNTABLE COMPARTMENT
FOAM PROTECTION FOR TURNTABLE SECTION
DIMENSIONS: 8 3/4"(H) X 63""(W) X 18 1/2"(D)
WEIGHT 70 LBS
Price: Inquire


item # GMI-10 R (TURNTABLE)

SPECIFICATIONS
ROAD CASES FOR 10" MIXER
TO ACCOMMODATE TWO TURNTABLES
PREMIUM 1/2" MULTI-LAYER PLYWOOD (LIGHT WEIGHT)
CHROME CORNERS, REMOVABLE LID, CARRYING HANDLES
FULLY FOAM LINED TURNTABLE SECTION
FOAM PROTECTION FOR TURNTABLE SECTION
DIMENSIONS: 7 1/2"(H) X 53""(W) X 18 1/2"(D)
WEIGHT 55 LBS
Price: Inquire


ITEM # GMI-06 (Turntable)

SPECIFICATIONS
ROAD CASE FOR 19" MIXER
TO ACCOMMODATE TWO TURNTABLES
PREMIUM 1/2" MULTI-LAYER PLYWOOD (LIGHT WEIGHT)
CHROME CORNERS, REMOVABLE LID
BLACK CARPET, RUBBER FEET, SPRING HANDLE
FOAM PROTECTION FOR TURNTABLE SECTION
DIMENSIONS: 7 1/8"(H) X 57 3/4""(W) X 17 1/2"(D)
WEIGHT 50 LBS
Price: Inquire

[baltoed]

Item # GMI-320 (CD)
PROFESSIONAL CD ROAD CASE
SPECIFICATIONS
Road Tuff CD Transport case holds 320 CD's, 900+ in sleeves
Heavy Duty Spring Loaded Recessed Hardware
Removable Lid with waved foam
Heavy Duty Chrome corners & clamps
Heavy Duty Casters for EZ tilt back moving
Black durable carpet
dimensions: ( 46"(h.) x 8"(w) x 181/2"(d)
Weight 50 lbs
Price: Inquire

( sorry decent photo not available)

[Stripe]

also keep an eye on the thread copied in the vendor area of the forums ;)

[baltoed]

Item # EQ-B5100 - Black
Item # EQ-S5100 - Silver
Professional Equalizer w\spectrum

Dual 10 Band graphic equalizer
Each Band is Individualy lit with a blue LED for Easy Readout and Functionality
4 Channel Input to control many different inputs
Cutting Edge Digital Graphic Spectrum
Direct Equalizer Fuction
Freq resp 32hz-16khz
Tone Control at 10khz ±14db
Low Distortion large-dynamic Circuit
Dimensions: 17"W x 2"H x 10"D
(430mm x 50mm x 240mm)
Weight: 5 lbs (2.3 kg)
110-220V Switchable
M.A.P. $89.00 Price: Inquire

[baltoed]

Item # EQ-B5200 - Black
Item # EQ-S5200 - Silver
Professional Equalizer w\spectrum

Dual 10 Band Digital Graphic Equalizer
Each Band is Individualy digitaly lit with a blue LED for Easy Readout and Functionality
Super Large dot matrix graphic fluorescent display
Cutting Edge Digital Graphic Spectrum
Built in 4 EQ modes
8 custom EQ modes
Input \Output Impedance: 22kohm \ 200ohm
Freq resp 20hz-20khz ± 0.5db
Control Frequency 2x10
Control Range ± 12dB
THD <0.2% @ 1 khz
S\N Ratio >80dB
Control Signal In/Out and low cut
Dimensions 19"W x 8"D x 1.75"H
(482 x 200 x 44mm)
Weight: 6.2 lbs (2.8 kg)
110-220V Switchable
M.A.P. $149.00 price: Inquire

[baltoed]

Item # PLTTB1 by Pyle Pro
Professional Belt-Drive Turntable

Pitch Control: +/- 16%
Strobe Light Illumination
Weighted ‘S’ Tone Arm
Cartridge and Stylus Included
Dust Cover Included
Start/Stop Button
33/45 RPM
Dimensions: 16.93''W x 4.73''H x 14.57''D
110/220 Voltage Switchable
weight: 9 lbs
Warranty: 1 Year
price: Inquire

[baltoed]

Item # PLTTD2 - Pro Direct-Drive Turntable
Pitch Control: +/- 10%
Strobe Light Illumination
Weighted ‘S’ Tone Arm
Target Light Cartridge and Stylus Included
Start/Stop Button
33/45 RPM
Turn Table Platter: Aluminum Die-Cast Diameter 13''
Driving Motor: Quartz Direct Drive, 3 Phases, 8 Poles
Starting Torque: 1.2kg/cm
Braking System: Electronic Brake
Start Up Time: Less Than 0.7 Seconds at 33 1/3RPM
Wow & Flutter: Less Than 0.09%
Power Consumption: 15W
Dimensions: 17.71''W x 5.39''H x 14.64''D
110V AC
weight: 24 lbs
price: Inquire

[jdiddy]

I will admit, I love the look of the blue ice x5000 amplifier. I also like those eq's.

[baltoed]

I will admit, I love the look of the blue ice x5000 amplifier. I also like those eq's.

Good to know I could find something that would suit your tastes ..:)

They are a bit more upscale than the other model..but manuf. by the same parent company. Ive got a ton of stuff to post..just trying to find a mix. Some people dont have deep pockets ( read as little money ) and while would love to have all top shelf stuff ..do have to be realistic to the "depth" of their pockets..hense the need for lower priced goods..hopefully not at the sacrifice of quality !

Balto~ED

[baltoed]

Club Series Amps

Technical Hi-Fi raises the standard in studio power amplifiers with its CLUB SERIES. Engineered for the critical demands of the professional DJ, they deliver clean, dynamic power with the legendary sound quality and reliability that pros depend on, delivering crystal-clear highs, smooth and accurate mids, and powerful, chest-thumping lows. Incredible performance and the ultimate in reliability under harsh conditions set the CLUB SERIES amplifiers apart from all others.

Item # PP1000 - Black
Item # PP1000S - Silver

PP1000 Specs
1000 Watts peak power
450 Watts @ 2 ohm
360 Watts @ 4 ohm
200 Watts @ 8 ohm
Inputs: 1/4" plugs
Outputs: Banana plug gold terminals
1/4" plugs
Oversized cooling hyper speed fan
Iridescent Blue Led Light Sound Meter
Dimensions: 19"W x 5.5"H x 13"D
(490 x 140 x 330mm)
Weight: 18 lbs (8.2 kg)
110-220V Switchable - Dual Fused
M.A.P. $ 169.00 Price : Inquire


Item # PP2000 - Black
Item # PP2000S - Silver

PP2000 Specs
2000 Watts peak power
600 Watts @ 2 ohm
460 Watts @ 4 ohm
240 Watts @ 8 ohm
Inputs: 1/4" plugs, XLR Plugs
Outputs: Banana plug gold terminals
1/4" plugs
Crossover: 2 1/4" Inputs - 2 1/4" Outputs
Parallel \ Stereo Switch
Oversized cooling hyper speed fan
Iridescent Blue Led Light Sound Meter
Dimensions: 19"W x 5.5"H x 17"D
(490 x 140 x 430mm)
Weight: 33 lbs (15 kg)
110-220V Switchable - Dual Fused
M.A.P. $ 229.00 Price : Inquire

Item # PP3000 - Black
Item # PP3000S - Silver

PP3000 Specs
3000 Watts peak power
800 Watts @ 2 ohm
550 Watts @ 4 ohm
300 Watts @ 8 ohm
Inputs: 1/4" plugs, XLR Plugs
Outputs: Banana plug gold terminals
1/4" plugs
Crossover: 2 1/4" Inputs - 2 1/4" Outputs
Parallel \ Stereo Switch
Oversized cooling hyper speed fan
Iridescent Blue Led Light Sound Meter
Dimensions: 19"W x5.5"H x 17"D
(490 x 140 x 430mm)
Weight: 35 lbs (16 kg)
110-220V Switchable - Dual Fused
M.A.P. $289.00 Price : Inquire

( image representational of all model numbers )

[Dj Jag]

could you feature those high-end products like pioneer, technics.. etc..? well am just a fad at price matching though before buying. if you know what i mean. and one more thing, the blue ice you got there looks mad IMO :spin:

[baltoed]

could you feature those high-end products like pioneer, technics.. etc..? well am just a fad at price matching though before buying. if you know what i mean. and one more thing, the blue ice you got there looks mad IMO :spin:


I could *only* if I was carrying them..sorry but Im not

[jdiddy]

I could *only* if I was carrying them..sorry but Im not
It's to bad you don't carry them, I'm sure you would get more business. I think that you stick up for these products only because you sell them. You know as well as we do that most are pretty much junk. Sure, there are those little 12 and 13 yr old wanna be's buying it because they can't afford the good stuff. Those of us that know about equipment won't be buying the stuff you sell. I admit, some of the products look cool but thats no indication of how they perform. I also think the specs on those amps are inflated to look more powerful, much like Pyle, Pyramid, Gemsound, etc..
So, work for a company that deals with real gear and I'm sure you'll do better business. I'm sure you are a great business man, but those products are hurting you.

[baltoed]

It's to bad you don't carry them, I'm sure you would get more business. I think that you stick up for these products only because you sell them. You know as well as we do that most are pretty much junk. Sure, there are those little 12 and 13 yr old wanna be's buying it because they can't afford the good stuff. Those of us that know about equipment won't be buying the stuff you sell. I admit, some of the products look cool but thats no indication of how they perform. I also think the specs on those amps are inflated to look more powerful, much like Pyle, Pyramid, Gemsound, etc..
So, work for a company that deals with real gear and I'm sure you'll do better business. I'm sure you are a great business man, but those products are hurting you.


I "stick up" ????

By the way ..you might have noticed Pyle in my line up too..I put these up because I can make a good deal on them..but why do you wish to bad mouth them?..did I do something to you I dont know about..??? just saying their are junk with out comparsion data?..Thanks budd..do me a favor and from here on keep that opinion off my thread?.. I am not attacking any product you wish to acclaim as the best..and Im not claiming these are the best..if you ever read my first post.. I admitted only that I could get good prices on these products. Your negative hype is not doing me any favors

Are you in any market for a Pyle item?..what?..can I quote you a price?

[djthunder]

baltoed,

You admit to not knowing a lot about the inner workings of the items you sell. I will give you a little bit of a review to help you out. A lot of the line level equipment, for the price, is probably okay, particularly for someone on a tight budget, as long as they do not abuse their equipment, and as long as you do warranty your items well. I don't necessarily mean that you will have to warranty everything, but there is a higher likelyhood that you will do some warranties. I work in a repair department, for electronic equipment, and the difference between less expensive equipment verses more expensive equipment, is sometimes lower quality parts or parts operating closer to their tolerances, and quality control, how much time the circuit boards are allowed to run through the solder flow machine. What this means, is higher dallor equipment can be badly abused and servive, where as lower end equipment will surely fry if operated out of specification, or in other words, operated with a lower ohm load than recommended, operated in clipping conditions, operated with too hot of a signal going into it. Generally, electronic parts are rated at half of what they can really take. Some manufacturers take advantage of that, & purchase parts that are rated lower, knowing that they can actually take the power needed -- but this means they are running closer to what their actual limits are. Also, because these kinds of items are being run through production faster, to keep costs down, you have more problems with cold solder joints that break down under heavy load.

The other part of this, is that lower end companies will sometimes try to exagerate the power their amplifiers can produce, by writing down peek-to-peek power output, rather than RMS power output. I don't know about all the Technical Pro amps, but I know the first one's you listed, that say they can put out something like 600 Watts into 2 Ohms, per channel, is actually rated at about 95 Watts per channel RMS into 8 Ohms. The rating they provide is in Peek to Peek.

On the other items, like the EQ's, mixers, and such, they will probably be okay for someone on a tight budget, as long as they are not abused. However, you better be offering a warranty, & I would recommend hooking some of these items up yourself to see how they are. I haven't used any of these items personally, so I can not say anything for quality.

What I would recommend, is if after inspecting the non-power amp items yourself, you find them to be acceptable, go ahead and sell some. If you want to sell the amplifiers too, that's okay, but you had better list the RMS power rating at 8 Ohms per channel, or you are going to make some people very, very mad at you.

Since you are looking at selling less expensive equipment, and making some people some good deals, I would highly recommend taking a look at becoming a dealer for Behringer, particularly some of their amplifiers. They are producing an EP1500 and a EP2500 amplifier, which are basically clones of the QSC RMX amps for about half the price. I haven't found a bad review of the Behringer amps yet, and they are becoming more popular. I can get a Behringer EP2500 amp rated at 1200 Watts RMS per channel at 2 ohms (would be somewhere in the range of 3200 Watts Peek to Peek per channel, to compare to your Technical Pro amps, apples for apples) for $300 & free shipping. Also, while Behringer is a budget equipment producer (by comparison to QSC, Crown, etc) it is loads better than Pyle, Pyramid, etc.

Anyway, if you are tied into the Technical Pro stuff, maybe go ahead and sell the non-amplifier stuff, & look at becoming a dealer for Behringer as well, and you will do better. Just my 2 cents. I do not think you are trying to rip anyone off, I suspect you are an honest guy, & I am giving you some honest advice. I wish you luck :)

[Ironfist DJ]

baltoed,

You admit to not knowing a lot about the inner workings of the items you sell. I will give you a little bit of a review to help you out. A lot of the line level equipment, for the price, is probably okay, particularly for someone on a tight budget, as long as they do not abuse their equipment, and as long as you do warranty your items well. I don't necessarily mean that you will have to warranty everything, but there is a higher likelyhood that you will do some warranties. I work in a repair department, for electronic equipment, and the difference between less expensive equipment verses more expensive equipment, is sometimes lower quality parts or parts operating closer to their tolerances, and quality control, how much time the circuit boards are allowed to run through the solder flow machine. What this means, is higher dallor equipment can be badly abused and servive, where as lower end equipment will surely fry if operated out of specification, or in other words, operated with a lower ohm load than recommended, operated in clipping conditions, operated with too hot of a signal going into it. Generally, electronic parts are rated at half of what they can really take. Some manufacturers take advantage of that, & purchase parts that are rated lower, knowing that they can actually take the power needed -- but this means they are running closer to what their actual limits are. Also, because these kinds of items are being run through production faster, to keep costs down, you have more problems with cold solder joints that break down under heavy load.

The other part of this, is that lower end companies will sometimes try to exagerate the power their amplifiers can produce, by writing down peek-to-peek power output, rather than RMS power output. I don't know about all the Technical Pro amps, but I know the first one's you listed, that say they can put out something like 600 Watts into 2 Ohms, per channel, is actually rated at about 95 Watts per channel RMS into 8 Ohms. The rating they provide is in Peek to Peek.

On the other items, like the EQ's, mixers, and such, they will probably be okay for someone on a tight budget, as long as they are not abused. However, you better be offering a warranty, & I would recommend hooking some of these items up yourself to see how they are. I haven't used any of these items personally, so I can not say anything for quality.

What I would recommend, is if after inspecting the non-power amp items yourself, you find them to be acceptable, go ahead and sell some. If you want to sell the amplifiers too, that's okay, but you had better list the RMS power rating at 8 Ohms per channel, or you are going to make some people very, very mad at you.

Since you are looking at selling less expensive equipment, and making some people some good deals, I would highly recommend taking a look at becoming a dealer for Behringer, particularly some of their amplifiers. They are producing an EP1500 and a EP2500 amplifier, which are basically clones of the QSC RMX amps for about half the price. I haven't found a bad review of the Behringer amps yet, and they are becoming more popular. I can get a Behringer EP2500 amp rated at 1200 Watts RMS per channel at 2 ohms (would be somewhere in the range of 3200 Watts Peek to Peek per channel, to compare to your Technical Pro amps, apples for apples) for $300 & free shipping. Also, while Behringer is a budget equipment producer (by comparison to QSC, Crown, etc) it is loads better than Pyle, Pyramid, etc.

Anyway, if you are tied into the Technical Pro stuff, maybe go ahead and sell the non-amplifier stuff, & look at becoming a dealer for Behringer as well, and you will do better. Just my 2 cents. I do not think you are trying to rip anyone off, I suspect you are an honest guy, & I am giving you some honest advice. I wish you luck :)

I am new to this, and i was interested in becoming a DJ, what all do i need? you mentioned that you could get a Behringer EP-2500 for $300, if so, could you tell me where? or suggest an amp for a beginner DJ?

thanks

[speedjay]

way to dig up a thread that is 2 1/2 years old!

[amazingkarma]

So dude can find a thread that is 2 1/2 years old but can't find a Behringer EP-2500 for $300!??!??! LOL! Too funny.

Google and if they are $329 here and there, call them and make a deal for $300 flat. Someone will bite.

[DJ Pyro]

So dude can find a thread that is 2 1/2 years old but can't find a Behringer EP-2500 for $300!??!??! LOL! Too funny.

Google and if they are $329 here and there, call them and make a deal for $300 flat. Someone will bite.

aye at least he searched unlike some folks on here
lol.

[Trip]

Wtf Is Wrong With You Ironfist. Rawealshdfkasldjfaisldjf;asdkfa;sjf11!11!

[EJSandstrom]

Rep for using the search. I was getting anoyed with Baltoed. I never even looked at the date.

[Mike D]

how exactly isn't this spam?

[Ironfist DJ]

sorry, i had no idea...i found this..yesterday? sorry...