Stand alone Crossfader?

[KSquared]

Does anyone know if there's a company that makes a stand alone Crossfader? I'm looking for something that is built like the ebay listing below. Simple and compact, just inputs and outs. No need for effects but does need to have battle style sharp curve. Thanks for the advice!

http://www.ebay.com/itm/Audio-Innovate-INNOFADER-PNP-Replacement-DJ-VCA-Mixer-Crossfader-Non-Contact-/291170534571?pt=US_Pro_Audio_Parts_Accessories&hash=item43cb1dc4ab

[TheRabbitMonk]

Is it to go in a mixer? Or do you want just a cross fader and that's it?

If the second one there is a device from years ago, I don't know what it's called but it was posted in here one time. Might be difficult to get and expensive.

If the first one from what I've heard innofade is one of the best on the market..

[KSquared]

Just the fader. I didn't know if I could just purchase that crossfader and wire it a certain way to integrate it into my mixer that is already present. I just want to drop it into that gap right behind the handle of the coffin.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfa1/t1.0-9/10494681_10203792072817387_5923184510086767287_n.j pg

[KSquared]

Found it!

http://www.ebay.com/itm/Innofader-Innofader-Pro-Professional-Replacement-DJ-Cross-Fader-Static-Free-/161381927954?pt=US_Pro_Audio_Parts_Accessories&hash=item25931ccc12

[TheRabbitMonk]

I think it needs to be set inside the mixer. The innofade guy is a member here as well.

[emarx]

Hey Ksquared,

The best low cost way to do this would be to replace your Denon with something like a DIF-1S mixer and then get extension wires to hook up the Innofader PNP to the mixer. Because of the long wires, I definitely suggest you use a VCA mixer like the DIF-1S because if you use a cheap analog mixer you will have all sorts of problems with audible noise.

[Ocie]

I don't think I've ever seen a coffin that holds two decks like that. Are they directly side by side?