_rt_
06-06-2013, 11:26 AM
I've recently modified the first of two turntables I picked up.
Replaced the MK2 faders with M3D/MK5 faders.
Replaced the LED's.
Replaced the broken switch.
Replaced audio cables and eliminated the ground wire.
Painted the table.
I am clear-coating the table now and noticed that the vinyl stickers I'm using show a faint line around the perimeter of the label.
Granted I've only used one coat as of now, but to those that have done this before:
If I apply three or four coats, does the label blend into the surround area?
If not, I'm taking them off, cleaning up the paint and clear-coating without the labels.
Thanks all-
Replaced the MK2 faders with M3D/MK5 faders.
Replaced the LED's.
Replaced the broken switch.
Replaced audio cables and eliminated the ground wire.
Painted the table.
I am clear-coating the table now and noticed that the vinyl stickers I'm using show a faint line around the perimeter of the label.
Granted I've only used one coat as of now, but to those that have done this before:
If I apply three or four coats, does the label blend into the surround area?
If not, I'm taking them off, cleaning up the paint and clear-coating without the labels.
Thanks all-