DJzrule
04-02-2013, 09:21 PM
Hey guys, so I'm just doing some spring cleaning/prep for the new DJ season over here in LI. The weather was nice so I headed into the shop to do some tinkering, and out came this beauty. Now I just gotta order my XLR's to go next to the C13 IEC socket on the back to really neaten up and cut down setup time. ;)
So far:
1x IEC socket
2x 12v red LED strips (autozone/amazon/eBay/everywhere has them)
1x Transformer/Wall-wart for the LED strips (12v 200ma)
1x Power strip
Assorted wirelooming (great for neatening up cables, but a PITA to run thick wire through initially)
Assorted heatshrink
Assorted wirenuts
14AWG cable
Later on:
2x Male XLR jacks
Possible:
2x RCA stereo jacks for external hookups with other computers/iPads/outside sources
1x XLR Male jack for keeping my mic system external when I'm using 2 laptops on the sliding top
Without anymore interruption, the end result:
http://img9.imageshack.us/img9/9202/201304022105582.jpg
http://img5.imageshack.us/img5/3107/201304022106042.jpg
http://img690.imageshack.us/img690/8480/201304022106122.jpg
http://img254.imageshack.us/img254/5522/201304022106372.jpg
So far:
1x IEC socket
2x 12v red LED strips (autozone/amazon/eBay/everywhere has them)
1x Transformer/Wall-wart for the LED strips (12v 200ma)
1x Power strip
Assorted wirelooming (great for neatening up cables, but a PITA to run thick wire through initially)
Assorted heatshrink
Assorted wirenuts
14AWG cable
Later on:
2x Male XLR jacks
Possible:
2x RCA stereo jacks for external hookups with other computers/iPads/outside sources
1x XLR Male jack for keeping my mic system external when I'm using 2 laptops on the sliding top
Without anymore interruption, the end result:
http://img9.imageshack.us/img9/9202/201304022105582.jpg
http://img5.imageshack.us/img5/3107/201304022106042.jpg
http://img690.imageshack.us/img690/8480/201304022106122.jpg
http://img254.imageshack.us/img254/5522/201304022106372.jpg