PDA

View Full Version : Tech 1200 Height adjuster help Took it apart



Joe.G
10-16-2012, 03:24 PM
Hi, I un seized the height adjuster on my 1200 MK2 and it is working good, I used Viper Franks you tube video for help and this article http://www.kabusa.com/frameset.htm?/sl1200helicoid.htm

My Adjuster stops right at zero but goes past a little past the words after the six. Viper frank says, it should go a little past/before the zero and a little past the 6. Is my table ok? Thanks