Re-covered my Peavey PV215s

[Dave Daschofsky]

The carpet was getting pretty torn up after 5 or so years of use so I decided I'd refinish them in duratex. It took most of the day to do one of them and used just over a pint of the roll-on duratex. They look almost new now and the finish seems pretty solid, we'll see how it holds up after a couple years of use.

http://www.dancesbydave.com/gallery-2/peavey-re-covering/20120808_103539/

[VjQue]

I'm going to do the same to my pv215s. I was just go buy the duratex in the 5 gallon. Where and how much you get the coating from

[lburners]

Nice. That carpet can be a pain to get off sometime. I have duratex on a bunch of stuff. It looks slick but definitely needs a touch up from time to time.

[sss18734]

Much better than the original carpet!

[Dave Daschofsky]

I'm going to do the same to my pv215s. I was just go buy the duratex in the 5 gallon. Where and how much you get the coating from

The place I got it from was out of stock on the gallon buckets. Its the site they link to from bill fitzmaurice's site. It was around $14 a pint and a pint was just enought to do two coats on a pv215. I may put another coat on though.

[Dave Daschofsky]

Nice. That carpet can be a pain to get off sometime. I have duratex on a bunch of stuff. It looks slick but definitely needs a touch up from time to time.

The carpet came off pretty easily. The rest was just scraping a few spots and some sanding. I also re-glued where the cab was separating and then did a bit of filling with putty.

[FranciscoVelasquez]

Can you please add more pictures of finished product... I have 4 of the same speakers, the carpet is okay but i think it would look better with this duratex paint. Where can we buy the paint from?

[Phil Noize]

Nice job!!

[Dave Daschofsky]

Can you please add more pictures of finished product... I have 4 of the same speakers, the carpet is okay but i think it would look better with this duratex paint. Where can we buy the paint from?

http://www.speakerhardware.com/categories.php?cat=10

I got the roller grade stuff. I think the next time I do it, I'm going to do two coats with a plain roller and one with the textured roller.

[jayhwk]

Looks good!

You should get some grill cloth and spray glue it to the back of the grill.

[VjQue]

here's mine I did. just waiting on the speakers to get done reconing. http://s23.photobucket.com/albums/b352/dirtbikeq/Pv215%20Concert%20Series/